UNI-PLOW ATV SNOW PLOW
In this video, we unbox and assemble the complete UniPlow ATV Plow System.
BEAR CLAW 3100LB ATV WINCH
In this video, we unbox and cover the components of the BearClaw 3100LB ATV winch by Extreme Max Products.
SILENT RIDER INSTALL - JOHN DEERE GATOR
In this video, we install the Silent Rider on a Gator 825i and provide initial thoughts on the difference in exhaust noise.
SILENT RIDER - JOHN DEERE GATOR 825i
In this video, we test the noise level reduction with the Silent Rider on a Gator 825i.
WARN Winch Mounting Plate 28880 - Fits Bayou 300 4x4
Considering mounting a winch on your 300 Bayou 4x4?
If so you will need to purchase a mounting plate, similar to the WARN Mounting Plate Kit 28880.
This video will save you some time on your install and demonstrate what bolt holes will need to be modified.
WARN UNIVERSAL ATV PLOW MOUNT KIT INSTALL
ATV-UTV Bearing Gease Packer Review
Machined Integrations has introduced a must have tool for all riders who like to keep their machines maintained.
If you've every tried packing your ATV or SxS wheel bearings by hand, this tool is will surprise you with its efficiency and ease of use.
This tool can be used with new wheel bearings and pre-existing bearings.
Can be purchased directly from www.machinedintegrations.com
Auxbeam 12" CREE LED Light Bar Review
Auxbeam sells this 12 inch CREE LED light bar, which is a spot-flood combo and puts out a claimed 7200 lumens with 24 3x CREE Chips. It has a sturdy aluminum housing, IP67 rated, which is waterproof, dust-proof and shockproof.
If you're new to the concept of CREE LED light bars and don't want to spend a lot, this powerful light is a great one to start with at $29.
USA LIGHTING OPTICS - WIRING HARNESS FOR LED CREE LIGHTS
In this video we are in the middle of installing our new CREE LED lights when we discovered a problem. The lights are pulsing at idle and need a more direct power source. We found this wiring harness kit from USA LIGHTING OPTICS to be a cheap fix for the pulsing lights.
SUPER ATV POWER STEERING KIT
After ordering the power steering kit by SuperATV it arrived lightning fast. Installation of the kit was fairly effortless with the directions included and wasn't nearly as hard to install as I had envisioned. The entire installation process took about two hours and the most difficult installation part was just having to get down low to access the parts under the steering column where it bolts up. A nice feature about the SuperATV EZ Steer Kit is everything truly bolts up or plugs in, no cutting wires or modify existing brackets.
First ride with the kit installed was amazing. The steering effort was easy, smooth and precise just as SuperATV advertised. The power steering kit is whisper quiet and if it wasn't so easy to steer you wouldn't know it's there. The best part about the EZ Steer is how easy it made the Commander for the rest of the family to drive. It really adds a measure of safety to those who operate it that are not as physically strong to steer the UTV at slow speeds. In conclusion, our experience with the SuperATV EZ Steer Power Steering Kit has been great and we recommend it as an alternative upgrade from factory power steering. Since our purchase of the product it's price has went up a bit less that $100, must be a popular upgrade.
POWERFUL CARBURETOR CLEANING KIT
Before you give up on cleaning and rebuilding you're old dirty ATV carb look at this product by GUNK. Over the years I've used and tried many different types of carburetor cleaners. Some of the aerosol types are a complete waste of money if you're carb has major buildup from sitting with gas in it for years. Recently I worked on a completely plugged Mikuni carburetor and almost considered it an absolute loss. Then I priced a rebuilt carb and as you know they are quite proud of a rebuilt Mikuni. You can easily buy individual parts for the Mikuni, so a decision was made to search for a beast of a cleaner. The cheapest and easiest alternative was to take a chance on a GUNK Carburetor Parts Cleaner. This kit by GUNK comes in a gallon paint can bucket and it's opened up the same way. After placing my parts in the cleaning tray I submerged them back into the can and sealed the lid. The next day I pulled the parts out and it was incredible how clean everything was. Another advantage to the kit was the fact that after pulling the parts out of the cleaner you wash the remaining fluid off with soap and water. Purchased the GUNK Carburetor Parts Cleaner for $25 here in Kentucky, considered it a great value and it can be reused used again and again.
SURECAN INITIAL REVIEW
Okay, so a gas can is just a gas can, right? That's what I always thought until I tested the SureCan. Having always been accustom to making a mess filling up our atv's and utv's with the old style gas cans, the Sure can is a breath of fresh air. It's well constructed, thought out and was also recommended on "Shark Tank". The 2.2 gallon SureCan was $45 shipped and on the initial test seems to be worth the cost. The 5 gallon SureCan is just a few dollars more, but the 2.2 gallon was a good size for smaller power equipment used around our home. I'll be posting a long term test review in the future after putting the Sure Can to use for a couple months and testing it on some trail rides. Stay Tuned!
All-Balls CV Axle Boot Repair Kit Review
All Balls Racing has a CV Boot Repair Kit that may save you money when the dreaded stick pierces you axle boot. This is an inexpensive repair kit versus replacing the entire axle, but anytime you deal with grease it's a messy job.